E-bike : a motor-assisted bicycle

 

  Many cyclists dream of always having a tailwind, the electro-assist bike helps to realise this dream. People who haven't sat on a bike for years, have been riding again, with this new type of recreational bicycle. Making a trip with a full battery, gives extra help for more strenuous routes with hills or headwinds. 

 

  Electric energy comes from power plants and solar/wind; batteries are just storage and buffering. Only if the power comes from renewable sources is the Ebike almost climate neutral; but not using raw materials for batteries and motors, makes the human-powered bicycle more environmentally friendly.

 

   The auxiliary motor provides assistance up to a maximum of 25 km/h. Because the speed of the Ebike differs little from the normal bicycle, extra facilities such as disc brakes and suspension are not necessary. There are also stronger motorcycle versions, with a speed of 45 km/h, but they have a helmet and insurance obligation, just like the moped; the market segment is marginal.

 

   The history of the electric bicycle goes back to the end of the 19th century. On December 31, 1895, Ogden Bolton Jr. received a patent (US Patent 552271) for a bicycle with an electric motor in the rear hub. In 1897, H. W. Libbey of Boston designed an electric bicycle (US Patent 596272) that was powered by a twin electric motor in the crankshaft. The system patented in 1899 by John Schnepf (US Patent 627066) used a roller to drive the rear wheel through the tire. In 1969, G.A. Wood Jr. and again (US Patent 3431994) designed such a product.

 

  A electric bicycle that works in combination with muscle power, is called a bicycle with pedal assistance in the Netherlands. The motor used in European countries is limited to 250W according to the European guideline EN 15194 . The first (2009) and second version of that standard (2011) were replaced by the final version on 12-10-2017. The speed of an E-bike is little different from an ordinary bicycle; additional features such as disc brakes and suspension are not necessery, but they are common.

    There are more powerful motor versions (speed-pedelecs),  but like a moped they require the use of a helmet and need insurance, with a speed of 45 km/h. They are more expensive and less popular. 

 

FIG.1 Electric Humber tandem 1898                                                                     FIG.2a Philips- Simplex E-bike 1932                                                                                             FIG.2b  Sinclair C5 1985

 

 

  In FIG.1 we see a Humber tandem from 1898. An electric bicycle from 1932, developed by the electrical firm  Philips and bicycle factory Simplex can be seen in FIG.2a, but the lead-acid battery was heavy, and it was not a commercial success.  Neither was the Sinclair C5 threewheeler recumbent FIG.2b with electro assist from 1985.

 

    Due to improvements in battery technology at the end of the last century, the electric bicycles became better and lighter. Cheap bicycles used a lead-acid battery or a Nickel-Cadmium battery (heavier and limited range), while the newer and more expensive bicycles used a nickel-metal hydride battery (NiMH) or a lithium-ion battery (Li-ion). The latter type now dominates the market, but will undoubtedly disappear again when cheaper, lighter and safer batteries are available.

  The E-bike battery has  technical limitations, that one should know and accept ! 

 

   Bike dealers don't always explain how fragile and expensive the batteries can be; they just want to sell bikes. So honest information can be scarce. If the Ebike is used dayly, it is normal that a battery (costing € 500 or € 1000) will need to be replaced after three years of use. Only with careful use, can a battery life of four or five years be reached. 
Many people put their bike in a shed in October, and don't get it out again until April for a first spring trip. If the battery is not charged in the interim, it will probably have been destroyed ; as a total discharged condition is very harmful for a rechargeable battery. To prevent this, the battery shouldn't be left without recharging for more than six months, or the battery will be seriously damaged.....

The total energy content (in Wh) of the battery is the product of the voltage and the specified number of Ampere-Hour (Ah) of the battery (electrical power is measured in Watts, which is the Amps multiplied by the Volts). E-bikes have the few hundred Wh, in "normal" mode of use, under average conditions, this results in a range of about 12 km per 100 Wh. Unfortunately batteries often lose efficiency in cold weather conditions, so in winter the range of an E-bike can be halved, strong headwinds can also be a extra load too. 

 The battery packs are available in a combination of cells, usually providing 24 or 36 volts of electricity. Of course, the battery selected is related to the choice of motor used ; in general, there has been a shift toward higher voltages over the years. New and high grade E-bikes will have 48V nowadays.

 

There are 6 different types of lithium rechargeable batteries.

The LTO type of battery is not used for E-bikes, as the LTO battery performs relatively poorly when it comes to the number of Wh per kilo. An advantage of this type of battery is that it can be charged very often. Therefore, in electric or hybrid cars, a LTO battery can be used to store electricity generated from braking energy. This type of battery is very stable at different temperatures, is good at absorbing energy, and gives a smooth power output, but it is expensive and has a lower capacity for its size.

The LCO type of battery is not used in E-bikes ; it is mainly found in mobile phones and laptop computers, it is fairly expensive and is temperature sensitive.

The LMO type of battery isn't used for E-bikes, unfortunately the number of recharging cycles is limited. The advantage of this battery is that he can deliver relatively high currents, so it is widely used in cordless electric DIY drills, etc.
The NMC type of battery is popular with E-bikes and electric cars, and is often used.
The LFP type of battery is often used in modern E-bikes, as it is a reliable and stable battery, the only drawback is that it loses some power, and needs to be regularly recharged !
The NCA type of battery can be used in E-bikes, but there are some disadvantages ; the number of recharge cycles is limited, and the battery is temperature-sensitive. But there is plenty of charge ; so Tesla has used it in its luxury electric cars, but the cheaper models are using LFP now.

Many bicycle sellers do not even know what is in the battery of their E-bikes !

It is important to realise that a good battery charger is more than just a simple power supply, there are sophisticated electronics which monitor and control the recharging process, with a limit on the recharging rate, and which automatically switch off when the battery is fully charged. E-bike suppliers therefore specify their own brand of batteries and chargers, which is important for warranty claims.
 
A few simple rules, for getting the most from a lithium rechargeable E-bike battery :
*  Batteries will last the longest if they remain at room temperature.
*  Never completely discharge them, this is really important to remember !
*  It isn't necessary to fully charge them up to 100 % capacity, 98 % charging is enough.
*  It is also preferable to only slowly and gently to discharge them and recharge them.
*  The more roughly they are treated the shorter their life will be, and the faster their performance will deteriorate !
It is clear that some of these ideal rules are broken regularly, so an E-bike battery is unlikely to last even for 5 years unfortunately. 

Video's about batteries: https://www.youtube.com/watch?v=WVcFytLYOIQ , https://www.youtube.com/watch?v=qJKFiv70bLc 

                   FIG.3a Folding E-bike with Bafang frontwheel hub drive.

FIG.3b An early Sparta E-bike with 24V Yamaha mid-motor.

FIG.4a  DIY set for building an E-bike with Yose rearhub motor, sold by Amazon

 

   It is also possible to convert an existing bicycle, see FIG.4b, Amazon and AliExpress supply all types: front wheel, rear wheel, and mid-mounted motors. These packages do not always comply with Dutch and EU regulations. The hub motor of FIG.4a has an additional thumb switch for "throttle" . The logic has a Standard mode according to the EU directive, where pedaling is necessary to switch on the motor . In the second mode you have the option to switch on engine support when riding away (up to 6 km/h), via the thumb switch. In the third mode you can also ride without pedaling.

    In fact, this is  illegal and can lead to legal complications in the event of an accident. These types of conversion sets are sometimes even offered with 3000W motors; then you are already much faster than the speed pedelec and you are liable for any damage. 

On USA-law for E-bikes:  https://www.youtube.com/watch?v=v71dkOM4NuE 

 

 

   The folding bike of FIG.3a is a typical example of the E-bikes around €1000. The Chinese manufacturer Bafang is a big player in that part of the E-bike sector. A disadvantage of frontwheeldrives, are unexpected steering reactions. The motor of this bike is specificly made for 20 inch wheels; the rev's of the wheel get higher when the wheels are smaller. The gearing of the motor must be adapted.

    This Bafang motor is 36 Volts; we see a shift in the market toward 48 Volts in the newer and more expensive models.

    Hub motors are the easiest to mount in a bicycle, and therefore are somewhat cheaper than a motor near the bracket (a so called mid-motor FIG.3b). Almost all expensive E-bikes have a mid-motor.

In the higher segment of the market, there are more manufacturers  offering a wider choise of models.

FIG.4b  My DIY  E-bike with rearhub motor from by Amazon

 < FIG.5 Skarper , a motor using the brake disk for powertransmission.

https://www.youtube.com/watch?v=b590KPosc_8   and  https://www.youtube.com/watch?v=-rSAsGcaxTo 

 

When we read the newspaper, every other month someone has a new idea. Most of these breaktroughs will never be in production. In 2019 Tesla had about 250Wh/kg energy density; Tesla bought the firm Maxwell that year. They had  advanced new types of dry batteries in pre-production. The expectation is that Tesla can devellop and massproduce batteries within a few years with 500Wh/kg, a fast loading rate, and with double number of recharges. The environmental issues are smaller for they use no solvents , have a double lifetime and don't use cobalt (expensive, poisonous). They even will be cheaper !

Another Tesla devellopment is the NMC/graphite battery. This should have 5000 load cycles , and only 10% decay over that period, so 1.600.000km use. Then the battery could be used as home energy storage for years  http://jes.ecsdl.org/content/166/13/A3031.full   But it still uses cobalt and maybe recycling can offer a good way to diminish the use and waste of this expensive and poisenous stuff; they are working on  it   https://www.youtube.com/watch?v=LAssX6hAyKs 

  And then there are new types like Lithum-Sulphur, Sodium-ion (Natrium),  Aluminum-Air batteries and many others....  By 2030 we will reach around 800Wh/kg. See: https://www.youtube.com/watch?v=qntd7i4Jk3M 

   Those batteries could last 400.000km; even when you ride 5000km a year, you can use it 80 years, for most people and bikes a lifetime.

The industry is developing a whole new series of gearboxes especially  for E-bikes, see  video on gearbox drivetrains below.

 

 

THE FUTURE OF TRANSPORTATION IS ELECTRIC !!

 

.

US 552271
PDF – 491,6 KB 426 downloads
US 596272
PDF – 239,0 KB 421 downloads
US 3431994
PDF – 663,1 KB 421 downloads